What to Expect From a Professional Carpet Cleaning Inspection

If you are considering hiring a professional company to clean your carpets, you should start by inspecting your home. The inspection will determine which areas of your home require special attention, and it will help you decide which methods are right for your carpets. Heavy furniture should be moved, as this will require additional cleaning of underneath and around it. The technician will clean each room and area in the order they are listed. In most cases, they will begin with the first run to break down and remove dirt. Check it out here!

Professional carpet cleaning

Before a professional carpet cleaning service begins work on your home, you should request a professional inspection. A professional can determine the level of cleaning your carpet requires based on its construction. Some carpets are made of natural materials, like wool, while others are made of nylon or olefin (berber). Depending on the construction, the cleaning process will differ. For example, a nylon carpet needs a cleaner with a pH level of ten or less, while a berber carpet can be damaged by hot hoses and furniture dragged over it. Lastly, a natural carpet can shrink if you use too much water in cleaning.

In addition to inspecting the appearance of your carpet, a professional carpet cleaner will check for damage, stains, and other problems before cleaning. If there are any, they can perform repairs and spot dye the area as needed. A professional carpet cleaning inspection will also provide information on the condition of your carpet, which will enable you to decide on a plan of action. A professional cleaning service can also recommend ways to extend the life of your carpet.

Methods

When you hire a professional carpet cleaning company, they will inspect the condition of your carpet before they begin cleaning. This will allow them to determine the level of cleaning needed and answer any questions you may have. They will also inspect the overall condition of the carpet, as well as any tough stains that may need additional treatment. In some cases, the carpet cleaning company may need to move some furniture so they can clean underneath it. After a thorough inspection, they will use the appropriate cleaning solutions to bring the carpet back to life.

The first step in the process is a pre-inspection. During this step, the carpet cleaning company will identify any stains or general spots that may require special treatment. If you are concerned about the quality of your carpets, you can request deodorization. In addition, if you have family members with allergies, you may also want to request a deodorizer. A company like USA Clean Master will use a process known as hot water extraction. This method penetrates deeply into the carpet, extracting contaminants and leaving a residue-free finish. Afterward, you can request a special treatment, such as stain removal.

Equipment

When choosing a company for professional carpet cleaning inspection, it’s important to check the equipment they use. Truckmounts are the standard, and the technology has evolved to include features such as heat-exchange technology. A new heat-exchange system provides super-hot cleaning solutions, leaving the carpet cleaner for longer. A qualified carpet cleaning inspector will use equipment with this technology. An IICRC-approved instructor, Mark Exner, can help you choose the right tools for the job.

You can rent rental carpet cleaning equipment, but these machines do not have the power to extract all of the cleaning solution from the carpet. A carpet should dry within 24 hours after cleaning. Otherwise, it will harbor mildew and mold. If you are concerned about the long-term effects of excessive water on your carpet, use mild cleaning solutions that have pH levels below 10, or five to eight for wool. They will also protect built-in stain treatments. Dehumidifiers and fans can be used to shorten drying time.

Inspection

A carpet cleaning professional will inspect your home’s carpet and upholstery to determine which areas require extra attention. The carpet cleaning technician will move heavy furniture, if necessary, to access those areas. After identifying problem areas, the technician will clean them in the order they were identified. First, they will clean the areas that need extra cleaning, such as under couches and bed frames. The technician will then clean the remaining areas, following the same process as the first run.

To determine how much water will be needed, the cleaning technician will first inspect the construction of the carpet. Common materials for carpeting are nylon and olefin (berber). The construction will affect how the cleaning solution should be applied. If nylon is the primary material, the solution should be ph 10 or lower. Berber, on the other hand, may become melted when hosed down and damage furniture. And if the cleaning solution is too hot, the natural carpet will shrink.

Cost

A carpet cleaning inspection is a great way to determine whether your carpet is in need of a new cleaning. A carpet that hasn’t been cleaned in years is likely to have a higher level of embedded dirt. Hiring a professional carpet cleaner will improve the look of your carpet and keep it looking newer for longer. These services typically come with a free estimate. They can also clean any stains and perform a complete disinfection, depending on your needs.

The cost of professional carpet cleaning inspection depends on the amount of stains on your carpet. The more serious the stains, the higher the price. Depending on the type of stain, water extraction can range from $40 to $300 per square foot. Pet stains can be costly because they sink deep into the carpet’s pile. The cleaning process can also require replacing wet padding, which will lead to mold and mildew growth. Browse next article!